Language
English 中文
Position :
All welded fixed ball worm gear ball valve
All welded fixed ball worm gear ball valve
All welded fixed ball worm gear ball valve
All welded fixed ball worm gear ball valve

All welded fixed ball worm gear ball valve

Size Range : DN100-DN1800
Pressure: PN16-PN320(Class150--Class2500)
Body Materials: WCB/A105/CF8/CF8M/F51/CF3M
Ball Materials: A105/SS304/SS316/F51/SS316L
Seal Materials: PTFE/PEEK/RPTFE/DEVLON/PPL
Connection: Welded/Full welded
OP: Hand lever/ Worm gear /Electric actuators/ Pneumatic actuators/Hydraulic actuator/Pneumatic-Hydraulic actuator/
Structure type: Trunnion ball /float ball/fixed ball
Introduction
DATA
Related
INQUIRY
Introduction
Product Usage

Q361F type PN1.6-PN2.5 fully welded ball valves are widely used in various fields. Its quality and stability are beyond the reach of ordinary cast steel ball valves. The service life of fully welded ball valves is much longer than that of cast steel ball valves and fully welded ball valves. It is widely used in various pipeline equipment such as urban gas, urban heating, petrochemical, shipbuilding, steel, pressure regulating station, power plant and so on.

Features

1. Fully welded ball valve, there will be no external leakage. The processing of the sphere is tracked and detected by a computer detector, so the processing accuracy of the sphere is high.

2. Since the valve body material is the same as the pipe material, there will be no uneven stress, no deformation due to earthquakes and vehicles passing the ground, and the pipe is resistant to aging.

3. The body of the sealing ring is made of RPTFE with a content of 25% Carbon to ensure no leakage (0%).

Technical requirement

1. Design and manufacture are in accordance with API 6D regulations.

2. The inspection and test of the valve shall be in accordance with the regulations of API 598.

3. The structural length of the valve is in accordance with the regulations of GB/T12224-2005.

4. The connection size is in accordance with GB/T12224-2005.

5. The pressure-temperature reference complies with the regulations of ASME B16.34.

6. The valve marking is in accordance with the regulations of GB/T12220.

7. The valve's sulfur resistance is in accordance with the regulations of NACE MR 0175.

 
DATA
DN L L1 H
DN400 762 Φ600 960
DN450 762 Φ600 960
DN500 840 Φ670 1050
DN600 1067 Φ808 1210
DN700 1345 Φ960 1390
DN800 1524 Φ1112 1660
Inquiry
If you would like to contact us for more information about our products ,please fill out the form below,thank you.
*Name
*E-mail
Phone
Country
*Message
Quick consultation
Name:
Email:
Phone:
Message:
Copyright: 1972-2020 Yuming Valve Group Co,Ltd. All rights reserved.